Flexible Area - Infiniton FLEXI AREA IND-FFT2 Manual De Instrucciones

• The function can work in any cooking zone.
The cooking zone returns to its original setting after 5 minutes.
•
If the original heat setting equals 0, it will return to
•

3.4.4 Flexible Area

• This area can be used as a single zone or as two different zones, accordingly to the cooking needs
anytime.
• Flexible area is made of two independent inductors that can be controlled separately. When working
as a single zone, the part that is not covered by cookware is automatically switched off after one
minute.
• To grant a correct pan detection and a even heat distribution, the cookware should be correctly
placed:
- In the front or rear side of the flexible zone when the cookware is smaller than 22 cm
- Anywhere with bigger cookware
To activate the flexible area as a single big zone, simply
press the Flexible Area control.
The power setting works as any other normal area.
If the pot is moved from the front to the rear part (or vice versa), the flexible area
detects automatically the new position, keeping the same power.
To add a further pot, press again the dedicated keys, in order to detect the cookware.
To use the flexible area as two different zones with different power settings, press the
Flexible Area control.
Examples for good and bad pot placement
3.4.5 French Plague
• This area can set the power according to the position of the pot.
• If the pot is on the bottom of flexible area, the power is set to Level 1.
• If the pot is on the middle of flexible area, the power is set to Level 10.
• If the pot is on the top of flexible area, the power is set to Level 14.
14
As big zone
As two independent zones
13
after 5 minutes.