PLAYKIN MERCEDES-BENZ G63 AMG Manual Del Usuario página 52

1. Install the drive motor on the rear axle, connect the motor cable plug to the plug in the motor
clamp port, and insert the motor into the slot in the clamp.
2. Fit the drive wheel on the rear axle and secure it.
3. Fit a Ø10 gasket on the rear axle.
4. Insert the key into the hole in the rear axle and fix the rear wheel on the wheel hub.
5. Fit the wheel cover on the wheel.
6. Perform the same procedure to fit the wheel on the other side.
MOUNT THE FOOT
1. Install the foot on the car body.
2. Secure it with an M4*12 screw.
MOUNT THE FILM
1. Position the iron sheet as shown.
2. Secure it with an M4*12 screw.
52