Warranty; Things To Consider Prior To Mounting - Good Earth Lighting SE1249-BP2-02LF7-G Manual De Instrucciones

Good Earth Lighting - The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a
®
period of (10) years from the date of original purchase by the consumer. The fixture is not warrantied for use in a commercial or retail
application. The warranty is limited to use in a residential environment. We will repair or replace (at our option) the unit in the original
color and style if available, or in a similar color and style if the original item has been discontinued, without charge. Defective units
must be properly packed and returned to the manufacturer with a letter of explanation and your original purchase receipt showing date
of purchase. Call 1-800-291-8838 to obtain a return authorization number and an address where to ship your defective product. Note:
C.O.D. shipments will NOT be accepted. The liability of the manufacturer is in any case limited to replacement of the defective light
fixture product. The manufacturer will not be liable for any other loss, damage, labor costs, or injury which is caused by the product.
This limitation upon the liability of the manufacturer includes any loss, damage, labor costs, or injury which is (I) to person or property
or otherwise; (II) incidental or consequential in nature; (III) based upon theories of warranty, contract, negligence, strict liability, tort, or
otherwise; or (IV) directly, or indirectly related to the sale, use, or repair of the product. This warranty gives you specific rights, and you
may also have other rights which vary from state to state.

Things to Consider Prior to Mounting

SELECT A LOCATION THAT ALLOWS
THE SENSOR TO PERFORM AT ITS
PEAK EFFICIENCY.
MINIMUM MOUNTING HEIGHT: 8 FT.
OPTIMAL MOUNTING HEIGHT: 8-10 FT.
Mounting above 10 ft. can decrease the
sensor detection range.
DO NOT mount near light sources
(street lights, tra c).
PASSIVE INFRARED
(PIR) SENSOR ZONE
THE FIXTURE USES A PASSIVE
INFRARED (PIR) MOTION SENSOR AND
AS SUCH DETECTS CHANGES IN
INFRARED RADIATION OF WARM
OBJECTS MOVING ACROSS THE
DETECTION ZONES.
The PIR sensor can be triggered by a variety of sources including
dryer vents, hot tubs, idling vehicles, etc.
The PIR sensor CANNOT detect motion through plexiglass, plastic, or glass
barriers.
DO NOT aim the PIR toward areas with pedestrian and motorized tra c and/or
other objects that generate heat.
DO NOT mount near nighttime light sources (street lights, tra c). Light sources can
cause the light to operate in daylight mode.
4
10-Year Limited Warranty
OPTIMAL MOUNTING
HEIGHT: 8-10FT.
MINIMUM
MOUNTING
HEIGHT: 8FT.