To Avoid the TV from Falling
1. Put the screws into the clamps and firmly fasten them onto
the wall. Confirm that the screws have been firmly installed
onto the wall.
You may need additional material such as an anchor
✎
depending on the type of wall.
Since the necessary clamps, screws, and string are not
✎
supplied, please purchase these additionally.
2. Remove the screws from the back centre of the TV, put the
screws into the clamps, and then fasten the screws onto the
TV again.
Screws may not be supplied with the product.
✎
3. Connect the clamps fixed onto the TV and the clamps fixed
onto the wall with a strong cable and then tie the string tightly.
Install the TV near to the wall so that it does not fall
✎
backwards.
It is safe to connect the string so that the clamps fixed on
✎
the wall are equal to or lower than the clamps fixed on the
TV.
Untie the string before moving the TV.
✎
4. Verify all connections are properly secured. Periodically check connections for any sign of fatigue for
failure. If you have any doubt about the security of your connections, contact a professional installer.
[PE550-ZX]BN68-04071C-X0L02.indb 33
Securing the TV to the Wall
Caution: Pulling, pushing, or climbing
on the TV may cause the TV to fall. In
particular, ensure your children do not
hang over or destabilize the TV. Doing
so may cause the TV to tip over, causing
serious injuries or death. Follow all safety
precautions provided in the Safety Flyer
included with your TV. For added stability
and safety, you can purchase and install
the anti-fall device as described below.
English - 33
Wall
2012-02-23
9:08:18