Filter Cleaning; Warranty Conditions; Care And Maintenance; Blowing Function - Ribimex PRASP30IT Manual De Instrucciones

USAGE
• Be sure that switch is in off position OFF and con-
nect
• the machine to a suitable socket.
• The machine must be always kept on horizontal
bases, in a safe and stable way.
• Insert the suitable filters for the proper use (Fig. 1
and Fig. 2)
• Never use the appliance without filters.
•
Use the most suitable accessories for the reque-
sted usage.
• Put switch on ON position in order to start the
machine.
• When job is over, switch off OFF and keep away
the plug from the socket.

FILTER CLEANING

• The machine shall be disconnected from its power-
source, by removing the plug from the socketout-
let, during cleaning or maintenance
1- Remove the filter
2- Shake the filter
• Once the filter has been cleaned, check whether it
is suitable for further use. If it has been damaged
or broken, replace it with an original filter.

CARE AND MAINTENANCE

• The unit is maintenance-free.
• The machine shall be disconnected from its power-
source, by removing the plug from the socketout-
let, during cleaning or maintenance
• Clean the exterior part of the machine with a dry
cloth.
• Move the appliance only by catching the carrying
handle located on the motor head.
• Store the appliance and the accessories in a dry
safe place, out of the reach of children.

BLOWING FUNCTION

• Insert the suction pipe into the upper hole (Fig. 3)
on the bin and tighten securely. In this way, the
blowing function of the product can be used.
MODEL WITH SIMPLE SOCKET FOR POWER
TOOLS (Code PRASP30IT/PEX)
Connect the power tool plug to the vacuum clea-
ner socket and connect the flexible hose to the dust
connector of the wet&dry vacuum cleaner. Start the
vacuum cleaner and then start the power tool.
MODEL WITH AUTOMATIC SOCKET FOR POWER
TOOLS (Code PRASP30IT/PE)
Connect the power tool plug to the vacuum cleaner
socket and connect the flexible hose to the dust con-
nector of the wet&dry vacuum cleaner. Turn the switch
to II position. When the power tool is connected, the
vacuum cleaner turns on when the power tool is on.

WARRANTY CONDITIONS

All our machines are subjected to strict tests and are
covered against manufacturing defects in accordance
with applicable regulations. The warranty is effective
from the date of purchase. The following are not
included in the warranty:
• Parts subject to normal wear.
• Rubber parts, charcoal, filters and the accessories
and optional accessories.
•
Accidental damage, caused by transport, neglect
or inadequate treatment, incorrect or improper use
and installation failing.
The warranty shall not cover any cleaning operations
to which the operative components may be subjected,
such as clogged nozzles and filter blocked due to lime-
stones. This pressure cleaner is intended to be used
for domestic and hobby work: the warranty
does not cover any other different kind of use.
3 Blowing function