Senix BLB4QL-M Manual Del Operador página 9

a firm grip on both handles or
grips.
6. Do not overreach. Always keep
proper footing and balance. Take
extra care when working on
stairs, steep slopes or inclines.
To avoid serious injury, do not
operate the unit while on a
ladder or a roof.
7. Keep hands, face, and feet away
from all moving parts. Do not
touch or try to stop moving parts.
8. Do not touch the engine
or muffler. These parts get
extremely hot from operation,
even after the unit is turned off.
9. Do not operate the unit faster
than the speed needed do the
job. Do not run the unit at high
speed when not in use.
10. Do not force the unit. It will do a
better, safer job when used at
the intended rate.
11. Always stop the unit when
operation is delayed or when
walking from one location to
another.
12. Before setting the unit down,
always make sure the engine
is off and all moving parts have
stopped.
13. If you strike or become
entangled with a foreign object,
stop the unit immediately and
WWW.SENIXTOOLS.COM
check for damage. Do not
operate the unit before repairing
damage. Do not operate the unit
with loose or damaged parts.
14. Turn the engine off and
disconnect the spark plug for
maintenance or repair.
15. Use only original equipment
manufacturer (OEM)
replacement parts and
accessories for this unit. Use of
any other parts or accessories
could lead to serious injury to
the user, or damage to the unit,
and void the warranty.
16. Keep the unit clean. Carefully
remove vegetation and other
debris that could block moving
parts.
17. To reduce fire hazard, replace a
faulty muffler. Keep the engine
and muffler free from grass,
leaves, excessive grease or
carbon build up.
18. If the unit starts to vibrate
abnormally, stop the unit
immediately. Inspect the unit
for the cause of the vibration.
Vibration is generally an
indicator of trouble.
9 - EN