Teac T-R460 Manual Del Usuario página 10

O P E R AT I O N S
HOW TO ADJUST CURRENT TIME
You can adjust the current time even if the system
power is off.
Time adjustment (for example: 10:45)
1. Press the TIME ADJUST button. (Clock section will
be shown on the display.)
2. Set hour (10) by pressing the TUNING buttons.
3. Press the NEXT button. (Minutes signal blinks on the
display.)
4. Set minute (45) by pressing the TUNING buttons.
● Set the day of month and the month by repeating
steps 3 and 4.
If you disconnect the AC plug, the current time is
reset to 0:00.
● If you want to adjust only "hour" and "minute",
adjust "hour" and "minute" and then press the TIME
ADJUST button.
5. Pressing the TIME ADJUST button or NEXT button
completes the adjustment.
HOW TO PRESET BROADCASTS
<Preparation>
Press the BAND button to select the broadcast band.
Manual Memory Presetting
1. TUNING
Select the broadcast frequency you want to
memorize by pressing the TUNING button.
2. PRESET CALL
Press the MEMORY button briefly (for 0.5 second or
less).
Select the channel you want by pressing the PRESET
CALL (channel) button while the "MEMORY"
indicator is blinking.
3. MEMORY
Press the MEMORY button to memorize the
broadcast.
● You can preset up to 30 FM and 30 AM (MW)
channels by repeating steps from 1 to 3.
Automatic Memory Presetting
1. MEMORY
Press the MEMORY button for long (for more than
0.5 second).
Whenever the next highest broadcast frequency is
selected, the selected broadcast is preset
automatically.
2. PRESET CALL
Check the preset broadcast by pressing the PRESET
CALL button.
Notes:
● In FM Automatic Memory Presetting, frequency is
automatically memorized twice. The setting which
has better reception will be preset first.
● If the new broadcast channel is preset to a channel,
the channel which had been preset to that position
earlier will be automatically erased.
● It is impossible to preset automatically in areas far
away from the broadcast station or in mountain areas
where received signals are weak.
_ 10 _