Care And Maintenance; Technical Specification - Trevi RA 742T Manual Del Usuario

RA 742T
CONTROL AND THEIR FUNCTIONS
1. Tuning Knob
2. Function Knob
3. Volume Knob
4. Battery compartment
5. LEDindicator
6. Speaker
7. Aux In jack
8. Telescopic Antenna
BATTERY POWER OPERATION
Install 4 x "AA" batteries into the battery compartment (4)
on the backside of the device, carefully as indicated in the
battery compartment.
Removethebatterieswhendon'tusethedeviceforalongtime.
OPERATION
1. To turn on the device put the Function Knob (2) into FM
position.
The LEDindicator (5) will turn on.
2. Tuneinthestationyouwant tolistenwiththeTuningKnob
(1).
3. Adjust the volume using Volume Knob(3).
4. Toturnoff the deviceput the Function Knob(2) into OFF
position.
The LEDindicator (5) will turn off.
RECEPTION NOTE
For FMreception pull out the Telescopic Antenna (1) adjust
the direction, lenght and angle to give the best reception.
AUX IN
Connect one endof thecableAux In(not supplied) tothe Aux
In Jack (7), and the other end to the external device.
Turn on the unit and start playback fromthe external device.
Note:
Once you have finished using unplug the Aux Incable, when
the cable is connected the radio function is excluded.

CARE AND MAINTENANCE

This device is a high precision electronic instrument; so it's
recommendedtonot placetheradioset near sourcesof heat,
inhumidor dusty places, nor exposeit directlytothesunlight.
Do not blockthe ventilation slits and leave aspace of at least
5 cmto allow ventilation.
Cleantheradiowithadampcloth.Usingdetergents,abrasives
or solvents may damage the radio set.

TECHNICAL SPECIFICATION

Power supply:
Frequency Range:
TREVI pursues a policy of continuous research and deve-
lopment.Thereforethecharacteristicsof theproduct candiffer
fromthose in the description.
English
6V -4x"AA"batteries
not included
FM87.5-108.0 MHz