Care & Cleaning - TurboTronic TURBOWAVE bio TT-FD30 Manual De Instrucciones

Operation of this food dehydrator
1. Slice food (for example, fruit) into 5 to 8 mm and put the slices on wire racks.
2. Put wire racks into the cabinet.
3. Set temperature by your desired one.
4. Switch the timer knob to select operation time.
5. Please avoid opening the glass door too often during dehydrating process.
6. Food humidity is up to you by selection of time.
Warning: Be sure to unplug the oven and allow it to cool before cleaning.
Any spattering that occurs while cooking and comes into contact with the continuous
coating is oxidized while the oven is in operation. If desired, wipe the walls with a damp
sponge, cloth or nylon scouring pad and mild detergent. DO NOT USE STEEL WOOL
SCOURING PADS, ABRASIVE CLEANERS OR SCRAPE THE WALLS WITH A METAL
UTENSIL, AS ALL OF THESE METHODS MAY DAMAGE THE CONTINUOUS CLEAN
COATING.
All accessories should be washed in hot soapy water or can be cleaned in a dishwasher.
The door can be wiped with a damp sponge and wiped dry with a paper or cloth towel.
Clean the outside with a damp sponge. DO NOT USE AN ABRASIVE CLEANER AS IT
MAY DAMAGE THE EXTERIOR FINISH.
DO NOT USE AN ABRASIVE CLEANER OR STEEL WOOL SCOURING PAD ON THE
DRIP PAN AS IT MAY DAMAGE THE PORCELAIN ENAMEL FINISH.
LET ALL PARTS AND SURFACES DRY THOROUGHLY PRIOR TO PLUGGING OVEN
IN AND USING.
Due to continuous product improvement, specifications subject to change without prior
notice.
WARNING
This appliance is not intended for use by persons (including children) with reduced
physical sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to ensure that they do not play
with the appliance.
1. Never use the device unsupervised! Switch off the device whenever you are not using
it, even if this only for short while.
2. This appliance is not intended to be operated by means of an external timer or
separate remote-control system.
3. If the supply cord is damaged, it must be replaced by the manufacturer, it's service
agent or similarly qualified persons in order to avoid a hazard.
4. Do not immerse this product in liquid.
Care & Cleaning
4