Precautions; Power Supply And Notice - Retekess TR629 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Precautions

◆Improper operation or use may cause electric shock. Please strictly follow the
operating instruction. Please do not open the back cover, otherwise there will be
a risk of electric shock.
◆Do not place any source of danger on the device (for example, liquid-filled
objects, lighted candles).
◆Do not use the radio near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
◆Do not use this product near water and moisture, for example: near a bathtub,
washbowl, kitchen sink or laundry tub; in a wet basement; or near a swimming
pool.
◆The machine should be placed in a place with sufficient ventilation space and
a flat surface. There should be a space of 5-10 cm in the front, rear, left, and right
sides of the fuselage, so that the machine can have enough space for ventilation.
Note: Do not place the machine on a bed, blanket or similar surface to prevent
the air vents of the machine from being blocked. Do not cover the machine with
tablecloths, paper, etc.
◆Do not let solids or liquids enter the body from the vents. The machine should
not be exposed to water droplets or splashes, and objects filled with liquids such
as vases should not be placed on the equipment.

Power Supply and Notice

◆Important Matters
Before connecting AC power or installing batteries, make sure that this machine
is turned off. This machine can only be connected or used with specified
batteries and AC household power sources.
◆Using AC Power
Plug one end of the AC power cord into the AC power jack and the other end into
a household power outlet.
-When the power cord is connected to the power source, the installed battery will
stop using and switch to use AC power;-In the shutdown state, the power supply
in the machine is not completely cut off, you need to unplug the power plug if you
need the radio to be completely cut off;
-Always hold the plug when disconnecting the power cord. Do not pull the cord
itself.
-Never touch the AC power plug with wet hands, Otherwise it may cause fire or
electric shock;
-The power cord should be placed in a fixed position to avoid bending, twisting or
trampling. Further more, do not use too many power plugs at the same time and
lengthen the power cord at will, it may cause fire or electric shock;
-The disconnecting device between the machine and the power supply of the
power grid is the power plug. Make sure that the power plug is easily accessible
to facilitate the disconnection of the machine from the power supply.
◆Battery Operation
Open the battery compartment cover on the back, and install 3pcs 1.5V UM1
batteries according to the polarity diagram inside the battery compartment, then
close the battery door.
1
Tabla de contenido
loading

Tabla de contenido