Tips For Use - VENTE-UNIQUE ARVIKA II Instrucciones De Instalación

D.3 Operation of control panel
a. Press the key ON/OFF. The POWER indicator
turns on. TEMPERATURE DISPLAY indicates the
temperature in the room. Press the key
ON/OFF again. The POWER indicator turns off.
b. Press the key F/C, the heat indicator turns
on. The sauna will automatically start by
pressing the key + or - on the left to adjust the
temperature.
D.4 Open the ceiling vent to allow a flow of fresh if required.
E. Tips For Use

Set the temperature to a comfortable level, normally 40 to 50℃.

Allow approximately 8-15 minutes for the sauna to warm up.

Perspiration will begin within 6 to 15 minutes after stepping into the unit. We recommend a sauna
session does not exceed 30 minutes.

When the temperature reaches the level set on the thermostat, the heaters will turn off and on
periodically to maintain the desired temperature level inside the sauna.

The front door/window/ceiling vent can be opened at any time to allow fresh air into the room.

Drink plenty of water before, during and after a session to replenish lost fluids from the body.

Taking a hot shower or bath before the sauna session will further accelerate perspiration. However, do
dry off thoroughly before entering, for excessive water will stain or warp the wood. A shower latter is
refreshing.
ENGLISH
c. Press the key IN or OUT to turn on the light
in or out of the room. Press them again, the
lights will turn off.
d. Press the key + or – on the right to adjust
the time. If the time indicates 00, the room
stops heating.
22