Shure V15V MR Serie Guia De Instalacion página 4

dure is completed, fully tighten the cartridge mounting
screws.
Tracking Force Adjustment. Place the Dynamic Stabi-
lizer down in the "operating" position. Set the tracking
force at 1-1/2 grams (optimum). (See the tone arm rec-
ommendations for antiskating force.)
If a separate tracking force gauge, such as Shure's SFG-
2 Stylus Force gauge is used, lift Dynamic Stabilizer to
the "up" position, and set the tracking force to 1-1/2
grams. When in use, the Dynamic Stabilizer absorbs 1/2
gram of the tracking force setting, so that the actual
tracking force at the stylus tip is 1 gram. Finally, move
the Dynamic Stabilizer back to the operating position.
VII Stylus and Dynamic Stabilizer Brush Cleaning.
Use the supplied brush, and brush only from back to front
to clean the stylus or Dynamic Stabilizer.
Use no liquids on the Stabilizer brush.
A 50-50 isopropyl alcohol-distilled water solution may
be used on the stylus.
Replacement Stylus
To maintain the original performance standards of your cartridge, be cer-
tain that any replacement stylus you buy bears the following certification
®
on the package: "This Stereo DYNETIC stylus is precision manufac-
tured by Shure Incorporated" AVOID INFERIOR IMITATIONS.
THEY WILL SERIOUSLY DEGRADE THE PERFORMANCE OF
®
YOUR CARTRIDGE. ALL GENUINE "DYNETIC " STYLI ARE
MANUFACTURED BY SHURE INCORPORATED. LOOK FOR THE
SHURE NAME ON THE STYLUS GRIP.
2