Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Installation
STEP 2 Leveling the refrigerator
CAUTION
• When installed, the refrigerator must be leveled on a flat, solid floor. Not leveling the
refrigerator can cause damage to the refrigerator or physical injury.
• Leveling must be performed with the refrigerator empty. Make sure no food items are
inside the refrigerator.
• For safety reasons, adjust the front a little higher than the rear.
Level the refrigerator using the special screws (levelers) on the front legs. Use a flat-head
screwdriver to turn the levelers.
NOTE
We recommend clearing more than a 5 cm (2 inches) gap from a wall to the rear of the
product.
24
English
FDR_RF8000B_SG_DA68-04540A-00_EN.indd 24
• To adjust the height of the left side:
Insert a flat-head screwdriver into the
leveler of the left side front leg. Turn the
leveler clockwise to raise the left side or
turn it counterclockwise to lower.
• To adjust the height of the right side:
Insert a flat-head screwdriver into the
leveler of the right side front leg. Turn
the leveler clockwise to raise the right
side or turn it counterclockwise to lower.
2022-07-21
11:13:46
Tabla de contenido
Solución de problemas
