Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INSTALLATION
Before first use
Let the unit stand for 24 hours before first use to allow the coolant to disperse.
Leave the door open during this time to allow production-related odours to
dissipate.
Note: All models without front ventilation or ventilation slots on the front are
not built-in appliances and must be free-standing.
Location
The place where you place the unit should:
•
be resilient and well ventilated.
•
be away from direct sunlight and heat sources.
•
not be too damp, such as bathrooms or washrooms.
•
have a level floor.
•
have a standardised electrical connection.
•
have a socket outlet with overvoltage protection.
•
be far away from microwaves, as their interference could have a negative
effect on the unit.
Furthermore, the ambient temperature in the room should be neither very cold
nor very warm. Cold and heat can possibly have a negative effect on the function,
so that the desired interior temperature is not reached.
Setting up
•
Remove all packaging material from and around the refrigerator.
•
Position the refrigerator so that the plug is accessible at all times. Disconnect
the mains cable and place the unit in its final location. Place it so that the
compressor is free and not in contact with other objects or walls.
•
Level out any small unevenness in the floor before filling the unit. Use the
adjustable feet for this purpose. To do this, turn the back feet completely in
and compensate for the slant with the front two feet.
EN
27
Tabla de contenido
