Taking Pictures - Trust DC-4700 Guía De Instalación Rápida

3) Taking Pictures

1. Turn the Mode Dial to
be automatically turned on with a red focus cursor in the center.
2. Frame your subject in your preferred pose and hold the camera steadily with
both hands
3. Ensure the lens and flash are not blocked by your finger or strap.
4. Press and hold the shutter button halfway down to lock the focusing on the subject. When the
focus cursor turned to green, the focus has been adjusted and is ready for image capturing.
5. Press the shutter button fully to capture the image.
4) Replay recorded image/video
1. Turn the Mode Dial at the top to
9-index of stored pictures
2. Press
then can use
Note:
5) Installing USB Driver Software (For Windows 98SE only)
-Install the software only if you are using Windows 98SE. If you are using Windows ME/2000/XP, you
do not need to install it.
- Do not connect the Camera to your Computer before installing the Camera Driver.
1. Turn on your computer and start Windows
2. Insert the Driver CD-ROM supplied into the
CD-ROM drive.
3. The installation program will start automatically. If
the installation program does not start automatically,
go to your desktop and double click on My
Computer
4. Click the "Camera Driver" to start installing the driver.
5. Reboot your computer after the installation completes.
6. After restarting, connect the camera and PC using the USB cable supplied and turn on the camera.
Windows will locate the driver and complete the installation.
All manuals and user guides at all-guides.com
(Still Image Capturing mode), and LCD will
to select the picture/video, and then press OK to enlarge the picture/video, and
to scroll the pictures or press
denotes there is voice memo recorded with the image file
denotes this is a video file
CD-ROM to start it.
Playback mode, and LCD will be turned on and display
to return to 9-index
Shutter button
To USB
Connector on PC