How To Access The Product; Reset To Factory Default Settings; Further Information - Axis Q60 Serie Guia De Instalacion

All manuals and user guides at all-guides.com
1
Cable holders
2 Multi-connector cable
3
Network cable
6. Turn the cable holders to keep the cables in place.
7. Put the camera base lid back in its original position and tighten the screws (torque
1.5 Nm).
8. Slide the unit holders on the network camera into the slots in the mounting bracket and
rotate the camera unit.
9. Secure the network camera to the mounting bracket by tightening the screws.
10. Install the supplied midspan, see the Installation Guide delivered with the midspan or
find it on www.axis.com

How to access the product

To find Axis devices on the network and assign them IP addresses in Windows®, use AXIS IP Utility
or AXIS Device Manager. Both applications are free and can be downloaded from axis.com/support
For more information about using the product, see the User Manual available at axis.com

Reset to factory default settings

Further information

• For the latest version of this document, see axis.com
• The user manual is available at axis.com
• To check if there is updated firmware available for your device, see axis.com/support
• For useful online trainings and webinars, see axis.com/academy
AXIS Q60 Series
27
EN