Taurus CROSSBACK 29.6 LITHIUM Manual De Instrucciones página 8

Downloaded by: pm-capetown on 19-09-2022 12:33 CEST
English
Brush vacuum cleaner
Crossback 29.6 Lithium
Inedit 29.6 Wash
DESCRIPTION
A Ergonomic handgrip
B Stick vacuum cleaner ON/OFF button (2
speed ECO/TURBO)
C Battery indicator
D Handle
E Main body
F Hand-held vacuum cleaner
G Folding handle button
H Hand-held vacuum extraction button
I Hand-held vacuum ON/OFF button
J Deposit extraction button
K Motor filter
L Motorized Turbobrush
M Rotating brush
N Wheels
O Wall mounted
P Charger
Q Accessory: Lance and Upholstery brush
R Anchorage for the accessory
S Mop attachment (*)
T Mop (*)
(*) Only on the Inedit 29.6 Wash model
- If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
USE AND CARE:
- Do not use the appliance if its filter(s) are not
correctly in place.
- Do not use the appliance to vacuum up water or
any other type of liquid.
- Respect the MAX level indicator
- This appliance is for household use only, not
professional or industrial use.
- This appliance should be stored out of reach
of children and/or those with reduced physical,
sensorial or mental abilities or who are unfami-
liar with its use.
- Use the appliance, its accessories and tools
in accordance with these instructions. Take
working conditions and job to be carried out into consideration. Using the appliance for anything
other than its intended use can create hazards.
- Do not operate on areas which contain metal
objects such as nails and/or screws.
- Never vacuum hot or sharp objects (cigarette
butts, ash, nails, etc.).
- Do not open the battery/ies under any circum-
stances whatsoever.
- Do not use the appliance with pets or animals
- Recharge the battery/ies only with the charger
supplied by the manufacturer. A charger that is
suitable for one typ of battery may cause explo-
sion or fire hazard when used with other battery
- Use the device only with the battery/ies for
which has been specifically designed. The use
of any other battery/ies s can cause an explo-
sion or fire hazard.
INSTALLATION
- Be sure to remove all packaging material from
inside the appliance.
ASSEMBLING THE CHARGER STATION:
- The appliance has a wall mounted (O) which
should be fix to a wall.
- Fix the wall bracket as you think appropriate,
using plugs, screws, and adhesive...
- Make sure that the bracket is firmly fixed; it
should be able to support twice the weight of the
- appliance.
- Fit the appliance into its wall mounted.
CHARGING THE BATTERY:
- Caution: The new battery does not come
completely charged and must be charged up to
the maximum before using the appliance for the
first time.
- Charge the battery at room temperature bet-
ween 4 and 40ºC.
- Plug the charger (P) into the mains and connect
the charger to the jack using the socket on the
appliance. The socket is located at the back part
of the hand-held vacuum cleaner. (Fig. 1)
- Approximately 3 to 4 hours are needed for a
complete charge of the battery. Never attempt to
over-charge the battery (although it is recom-
mended that the first charge of the battery be of
5 hours in duration).
- While the battery is charging, the pilot light will
flash, indicating that the charger is charging the
battery. (C)
- At the end of the time period specified above,
remove the battery from the charger.
- When the battery is charged disconnect the
charger from the mains supply.
- NB: Do not use the appliance while it is connec-