Cleaning: Last:30S
Start/Stop
Press Start/Stop
Display turns on so you can change settings with
other buttons.
Display turns off after 10 seconds of inactivity.
Press & hold 3 seconds
Start Up Process commences.
Press & hold 3 seconds
Shutdown Process commences.
Automatic Schedule
Press to toggle between Auto and Manual
Skip the process to stabilization
Press three seconds
Power Level
Press Pellet Feed Rate to cycle through P1, P2, P3
or P4
Thermostat Temperature
Increase or decrease the set point.
Check Temperature
Press to show current room temperature(R)
Press to show current Exhause temperature(S)
Press to show current Protection temperature (P)
Start/Stop
Auto/Manual
Power Level
Thermostat Temp
Every: 30M
Limpieza: Duración: 30SCada: 30M
Inicio/detención
Pulse Encendido/Detención
La pantalla se encenderá, de forma que puede
cambiar la configuración con otros botones.
La pantalla se apaga tras 10 segundos sin
actividad.
Mantenga pulsado 3 segundos
Comienza el proceso de arranque.
Mantenga pulsado 3 segundos
Comienza el proceso de apagado.
Programación automática
Pulse para cambiar entre Automático y Manual
Saltar el proceso a estabilización
Pulse durante tres segundos
Nivel de potencia
Pulse la Velocidad de alimentación de pastillas
para pasar por P1, P2, P3 o P4
Temperatura del termostato
Aumenta o reduce el punto establecido.
Comprobar temperatura
Pulse para mostrar la temperatura ambiente
actual (R)
Pulse para mostrar la temperatura de salida actual
(S)
Pulse para mostrar la temperatura de protección
actual (P)
Inicio/detención
Automático/Manual
Nivel de potencia
Temp.de termostato