cecotec CONGA 1990 CONNECTED Manual De Instrucciones página 47

Scrubbing intensity levels function
Press the scrubbing levels button on the remote control or on the App to adjust the water level
during the scrubbing process. There are 3 water levels: High, Medium or Low.
Magnetic Strip
Use the magnetic strip included with Conga 1990 Connected to delimit the cleaning area so the
robot is not able to access to certain areas.
Cleaning scheduling
- This robot includes schedule settings in order for you to customize the cleaning cycles. The
robot can only be scheduled through the remote control or through the App.
- Note: Make sure the remote control is close to the robot when setting the clock or
scheduling cleaning cycles.
Setting the remote control's time
- Press the clock button on the remote control. Digits will start blinking.
- Select the current day of the week by pressing the upwards and downwards buttons. Fig.
34
- Use the left and right buttons to set minutes and hour. Use upwards and downwards
buttons to change the digit while it blinks. Fig. 35
- Finally, press the power or the clock button. The robot will beep when the time settings
have been confirmed. Fig. 36
Setting cleaning schedule
- For a better and more comfortable cleaning, the robot includes a schedule function to set
daily schedules through the remote control or the App in those Conga models that include
app. In accordance to the configuration, the robot will automatically start cleaning the
selected days at the desired time.
- The time options on the remote control are: 12:00 a. m.–11:59 p.m. and 12:00 p.m.–11:59 p.m.
- Before setting the time and the robot configuration, make sure the robot's power switch is
on and that the power button on the robot is lit up.
Configuration with the remote control
- Press the schedule button on the remote control. Digits will start blinking. Fig. 37
- Use direction buttons to select the day. Once selected, use right and left buttons to select
minutes and hours. Use direction buttons when digits are blinking to configure the desired
minutes and hours. Press the power button to save settings. Enter the desired days and
follow the same steps to schedule them. Fig. 38
- Finally, press schedule button to exit scheduling mode. The robot will beep once indicating
the scheduled cleaning settings have been confirmed.
- The user may schedule as many days per week as desired. The home screen will display
when the robot is scheduled.
05660_Conga 1990 Connected_IM_YV_0121085.indd 47 05660_Conga 1990 Connected_IM_YV_0121085.indd 47
ENGLISH
47
6/8/21 13:08 6/8/21 13:08