Weighing Yourself; Deleting Scale Users - Beurer BF 500 Super Black Edition Instrucciones De Uso

11. "3" flashes on the display
exercise (considered over the long term). (1 = none, 2 = low, 3 = medium, 4 = high, 5 = very high/athletic).
Confirm your entry with the SET button
12. "End" appears briefly in the display
subsequent automatic personal recognition if within +/- 3 kg).

5.4 Weighing yourself

1. Step onto the scale barefoot. Stand still on the electrodes
weight evenly. The scale switches on automatically.
2. Your body weight appears on the display
then appear automatically. If the scale has detected several possible scale users, use the
select the correct one and wait 3 seconds. Step off the scale.
3. The following health values will then appear one after the other.
Body mass index (a healthy value is 18.5 - 25)
Body fat percentage (a healthy value is 16 - 28% for women and 11 - 23% for men)
Body water content in % (a healthy value is >45% for women and >50% for men)
Muscle percentage (a healthy value is 27 - 43% for women and 37 - 57% for men)
Note: For more details of the values, please see the app or the FAQs at www.beurer.com
4. If a Bluetooth connection has been established and the user measurements have been successfully taken
®
(e.g. for U: 1), the values will be transferred to the "beurer HealthManager Pro" app. This is indicated by the
measurement data transfer symbol
user. They will be transferred as soon as a connection has been established.
5. The scale switches itself off automatically.
Note: if the automatic scale user detection function is not working, press the
is displayed, and wait 3 seconds. Then take the diagnostic measurement.
Note: to display your last diagnostic measurement, briefly press on the scale until "0.0" and the user symbol
appear in the display
Then press the button
ments, press the button
Note: If you are wearing shoes when taking the measurement, only your weight will be shown (the weight is
automatically saved when the scale detects the scale user).

5.5 Deleting scale users

You can delete individual scale users in the "beurer HealthManager Pro" app.
Alternatively, you can also delete scale users directly on the scale. To do so, proceed as follows:
1. Briefly press on the scale until "0.0" appears in the display
2. Press the SET button
3. "Unit" appears in the display
4. "User" appears in display
5. Press and hold the SET button
onds, "dEL" will appear in the display. If you confirm with the SET button
. Use the
1
; then "0.0" with the user symbol. Perform initial measurement (for
1
. If the data cannot be transferred, up to 30 values will be stored per
10
, press button
1
4
to display the most recent diagnostic measurement. To display further measure-
2
again. Up to 30 measurements can be shown on the display
2
3
, confirm with SET button
1
, select your user with
1
until "End" appears in the display. If you press
3
/ button to set your activity level based on how much you
2 4
.
3
with both legs, making sure to distribute your
5
. The scale user detected (e.g. "U: 1" for scale user 1) should
1
repeatedly until your scale user is displayed and wait 3 seconds.
.
1
.
3
button
4
16
button
4
and confirm with SET button
button
, the user is deleted.
3
button to
4
until your scale user
.
1
.
3
within 3 sec-
4