Weighing Items Of Luggage; Switching On The Led Torch - Beurer LS50 Travelmeister Instrucciones De Uso

5.3 Weighing items of luggage

Whilst weighing the luggage, ensure that the LS 50 is always in a horizontal position.
Incorrect measurements may otherwise occur.
1. Pass the strap of
the luggage scale
through the handle
of your luggage as
shown.
Tare function
The LS 50 also has a tare function. To activate the tare function, proceed as follows:
1. Weigh an item of luggage as described in chapter "5.3 Weighing items of luggage".
2. As soon as "Hold" appears in the display, press the unit button / TARE button. "Tare" and
"0. 0 0" now appear in the display. The weight of the previously weighed item of luggage
is now stored internally and you can weigh an additional load. This process can be re-
peated as often as required.

5.4 Switching on the LED torch

To switch on the LED torch of the LS 50, hold the sliding switch on the side in the direction
of the connection ports. The LED torch is switched on. As soon as you release the sliding
switch, the LED torch is switched off again.
2. Secure the clip
of the strap as
shown.
3. Slide the sliding
switch in the di-
rection of the
unit button un-
til it clicks into
place. Wait until
"0. 0 0" appears in
the display.
13
4. Hold the LS 50 hori-
zontally with the item
of luggage attached
and lift upwards. The
weight is displayed
on the display. As
soon as the weight
is stable, it is fixed
on the screen and
is displayed.
"HOLD"