Operation - cecotec BAKE&FRY 1400 TOUCH STEEL Manual De Instrucciones

- Thoroughly dry all accessories and place them in the oven again.
- When using the device for the first time, it is necessary to let it operate for 18 minutes at
maximum temperature (230°C) to sterilise it and to eliminate any bad odours from the
manufacturing process.
- The unit may emit odour or smoke the first time, due to the protective film on the resistor.
This odour will disappear.
Note
Install the piece that will allow the proper distance to the wall manually. Place the piece and
screw both screws for proper attachment. Fig. 3

3. OPERATION

A quick guide to operation is explained below. For more details, please refer to the Control
Panel section in this section.
How to use the hot air frying oven. Quick operation guide.
- Plug the appliance into the mains supply. At this time, the device will beep and the On/Off
icon will flash.
- Press the On/Off icon to turn the device on and off. Programmes will light up.
- Press the desired programme or use the manual mode if preferred. You can set the time,
temperature, resistors and extra functions, like preheating or roasting.
- Once you have selected the programme or set the manual mode, press the Inicio/Pausa
icon to start cooking.
- To finish cooking you can:
1. Press the On/Off icon directly and the display will show the lighted up icons.
2. Press the Inicio/Pausa icon to pause it and then the On/Off icon.
- When cooking is finished, the device will beep and go into standby.
Control panel
Fig. 2.
Functions (12)
This device has 9 preset functions that are shown in the table below.
To select a programme, press the icon directly.
BAKE&FRY 1400 TOUCH STEEL
ENGLISH
39