Product Assembly; Operation; Cleaning And Maintenance - cecotec Ready Warm 3000 Now Manual De Instrucciones

4. PRODUCT ASSEMBLY

FLOOR INSTALLATION
1. Place the product upside-down on a soft and stable surface.
2. Place one of the wheel-mounting plates on one side of the product and make sure the
device fits in the gap between both wheels.
3. Use the screw provided to fix the wheel-mounting plate to the heater.
4. Repeat steps 2 and 3 with the other wheel-mounting plate on the other side of the heater.
INSTALLATION ON WALL
• The appliance must be installed keeping a minimum distance of 25 cm from the floor and
100 cm below the ceiling.

5. OPERATION

Power-level knob
Turn the power-level knob in order to select the desired heating power:
SYMBOL FUNCTION
I
1000 W
II 1400 W
III 2400 W
NOTE: the power-light indicator will light up during operation.
TEMPERATURE KNOB:
The room temperature can be adjusted by turning the temperature knob. Turn it clockwise to
increase temperature and anticlockwise to decrease it.
SWITCHING OFF:
Once you have finished using the heater, turn all power switches off, turn the temperature knob
anticlockwise to the minimum position and unplug the device from the power supply.

6. CLEANING AND MAINTENANCE

• Always turn off, unplug and allow the appliance to cool down before cleaning.
• Do not use abrasive scouring pads, powders or cleaners to clean the product.
• Use a soft, dampened and clean cloth to clean the product's outer housing.
• If the heater is not going to be operated for a long period of time, store it in a dry and safe
05321_Ready Warm 3000 Now_manual_EA.indd 11
ENGLISH
READY WARM 3000 NOW 11
19/7/18 10:16