Samsung SPN-12081P Manual De Instrucciones página 21

Setting the PoE Class for PTZ
When you have to connect the PTZ camera with 802.11at (30W), you need to change the Power Class
value to "class 4" manually. (Default PoE Class Value is "Auto".)
Configuring the PoE Class Option
1. Click the PoE manu and then
click the PoE Port settings.
2. Select the Port number connected with PTZ
camera on the From Port and To Port option.
And, change Power Limit option value to
"Class 4".
3. To apply this changes, click the [Apply] Button.
You can confirm this changes in the table below.
4. To save this value to Flash memory,
Click the [Save Config] Button in the
Save configuration manu of Save manu.
- When you don't save the changes finally and
System may be rebooted, all changes are lost
and restore to default value.
21