Web-based Management
After a successful physical installation, you can configure the switch, monitor the LED panel and
display statistics graphycally using a web browser.
(Internet Explorer version 8.0 and higher, Firefox, Chrome or Safari is compatible.)
1. Connecting the PC to the switch
Connect the Ethernet cable to any of Ports in front panel of the Switch and to the Ethernet Port on the
PC.
2. Setting the IP address on the PC
In order to login and configure the switch via an Ethernet connection, the PC must have an IP Address
in the same range as the Switch.
For example, if the switch has an IP address of
10.90.90.90, the PC should have an IP address
of 10.x.y.z, and a subnet mask of 255.0.0.0.
x/y : a number between 0 ~ 254
z : a number between 1 ~ 254
19