Midea MDRS723MY Serie Manual De Usuario página 10

2 3 Levelling door
1 Precautions before o
Before operation of accessories, it shall be ensured that the refrigerator is disconnected from power.
Before adjusting the
2 Schematic diagram of levelling the door body
List of tools to be provided by the user
wrench
The picture above is only for reference. The actual configuration will depend on
the physical product or statement by the distributor
When the fridge door is low:
Open the door, use a wrench to loosen the
to raise the height of the door. Once the doors are aligned, then tighten the locking nut by
rotating it anti-clockwise.
When the fridge door is high:
Open the door, use a wrench to rotate the adjusting nut clockwise to lower the
height of the door. Once the doors are aligned, then tighten the locking nut by
rotating it anti-clockwise.
peration :
door , precautions shall be taken to prevent any personal injury.
Levelling feet
Locking nut
Left
lockin
g nut and to rotate the adjusting nut anti-clockwise
EN-8
Adjusting nut