Silence Function; Lock Function - mundoclima MUCNR-H11 Manual De Instalación Y Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Silence function

2s
Keep pressing Fan button for more than 2 seconds to activate/disable Silence
function.
Due to low frequency operation of compressor, it may result in insufficient cooling
and heating capacity. Press ON/OFF, Mode, Sleep, Turbo or Clean button while
operating will cancel silence function.
FP function
Press this button 2 times during one second under HEAT Mode and setting temperature of
O
O
16 C/60 F or 20 C/68 F (for model RG10A10(F2S/H2S/G2S)/BGEF).
O
2
The unit will operate at high fan speed (while
compressor on) with temperature automatically
set to 8 C/46 F.
Note: This function is for heat pump air conditioner only.
Press this button 2 times during one second under HEAT Mode and setting temperature of
16 C/60 F or 20 C/68 F (for model RG10A10(F2S/H2S/G2S)/BGEF) to activate FP function.
Press On/Off, Sleep, Mode, Fan and Temp. button while operating will cancel this function.

LOCK function

5s
Clean
+
Turbo
O
5s
Press together Clean button and Turbo button at the
same time more than 5 seconds to activate Lock function.
All buttons will not response except pressing these two
buttons for two seconds again to disable locking.
97
Tabla de contenido
loading

Tabla de contenido