Virtual Wall - TCL Sweeva 2000 Manual Del Usuario

EN
4. When the figure turns 100%,
it means that the robot has been
successfully connected to the
Wi-Fi network
(Notes: The detailed distribution network steps can be operated according to the steps on the app.)
4. Reset Wi-Fi
When the robot fails to be connected with the Internet, please press
the Wifi light turns off. Then, it starts to flash slowly, accompanied by a buzzer sound. This indicates that
the robot is ready for new connection.
5. More APP functons
The TCL Home APP has scheduled cleaning, automatic cleaning, corner cleaning, fixed-point cleaning,
voice control ( connected with Alexa and Google voice assistant ) and other functions, please refer to
relevant instructions on the APP.
Due to the continuous development and upgrade of the APP, there may be some minor
◆
adjustments on the APP page, please refer to the actual version.
Wi-Fi wireless connection only supports networks in the 2.4GHz frequency band and
◆
does not support networks in the 5GHz frequency band.
If the pair is unsuccessul, please check the Internet status and try to pair again.
◆

Virtual wall

A virtual wall can be used to isolate areas that you do not want to be cleaned.In areas that do not need
the robot to enter, a virtual wall can be created along the entrance (as shown in the figure below);
All manuals and user guides at all-guides.com
5. After setting the name
of the robot and names of
rooms, click the "Try Now"
button to start using it
①
②
③
- 12 -
6.The main operation
interface on Sweeva
2000 APP
and hold it for 7 seconds before