stayer VAC2030 Manual De Instrucciones página 17

Make sure that you correctly insert the dust collecting
bag so as to allow the machine to operate.
3.2 Assembly
(VAC2030 / VAC2050C) Never remove the dust collecting
bag 11 as the vacuum cleaner will not work without it; it
must be there for suctioning both dry and liquid matter.
Unlock the latches 10 and remove the vacuum top 3. Make
sure that the collecting bag 11 is well seated along its whole
length against the inner wall of the tank 9. Reattach the
vacuum top 3. Secure fasteners 10.
Insert suction hose 8 into housing 7, such that it remains
firmly fastened and turn it clockwise up to the stop.
Illustrated description
1. Transport base.
2. Carrying handle.
3. Upper part of the vacuum cleaner (motor).
4. Switch.
5. Power outlet for power tools.
6. Wheels.
7. Suction hose housing (fitting).
8. Suction hose.
9. Deposit.
10. Closures.
11. Dust collection bag.
12. Pleated filter (HEPA).
13. Drain hose.
14. Antistatic load chain. (VAC 2050 C)
15. Locking / unlocking the tank. (VAC 2050 C)
16. Drain hose housing.
17. Blower housing
18. Filter cleaning button.
Note: The models do not have all the components of this list.
If the described component is not reflected in the illustration
of your tool, it is because your vacuum cleaner does not have
that component or function.
Operating instructions
Placement and testing
Initial operation
Observe correct mains voltage: The voltage of the power
source must agree with the voltage specified on the
nameplate of the machine.
Antistatic chain VAC2050C (14)
Always connect the chain of static discharge (fig.14) to
the bottom of the vacuum cleaner. This will eliminate the
possibility to 100% unpleasant electric shock (cramps) due to
accumulation of static electricity when aspirated into carpets,
rugs and the like.
Switching On and Off
To start the suction cleaner, place operation mode switch 4
ON (-).
To disconnect the vacuum cleaner, place operation mode
switch 4 OFF (O).
The BVAC2400DM model has 2 independent motors and 2
switches (4) that allow the machine to be activated at 1200W
or 2400W.
Operation with remote automatic Switching
Note: The VAC2000, BVAC2400DM model does not have an
automatic activation system, you must activate the vacuum
ENGLISH
17
cleaner before activating the tool connected to the power
outlet (5).
Place switch 4 to the operation symbol with remote automatic
connection (=).
The vacuum cleaner automatically starts operating after 4
seconds after the electrical tool has been switched on.
To terminate the vacuum cleaner's work, switch off the electrical
tool. The vacuum cleaner will disconnect automatically after
approx. 4 seconds. Once turned off, place switch (o).
Tuning operations
WARNING: Before making any adjustments to your
vacuum cleaner, disconnect it from the power supply.
Regular emptying ensures optimal suction performance.
If you still do not achieve normal suction performance, contact
one of our authorized technical services.
Wet Vacuuming
Danger of explosion and fire! Do not vacuum inflammable
or explosive fluids; for example, benzene, oil, alcohol,
solvents. Do not vacuum hot or burning dust. Do not
operate the machine in rooms where the danger of an
explosion exists.
Before vacuuming liquids, empty the tank, removing as much
dust and debris as possible.
In the VAC2050C model it is necessary to previously remove
the filter 12 before aspirating liquids. The VAC2030 model
includes a sponge filter that must be installed in the head (3)
before vacuuming. Both models must have the cloth waste
bag installed (11).
Once you have finished sucking up liquids, empty the tank,
either by disassembling the motor (3) and turning the machine
over, or by using the drain hose (13). Allow the filters and tank
to dry completely before vacuuming dry again.
Dry vacuuming
Before vacuuming liquids, empty the tank, removing as much
dust and debris as possible.
Make sure that the machine has the cloth bags (11) and the
HEPA filters (12) installed correctly before starting any task.
Otherwise the machine will not work and could be damaged.
Blower
Note: The BVAC2400DM does not have a blower system.
To use the blower function you must install the suction hose
(8) in the Blower Housing (17) and attach it by turning it
clockwise. By activating the machine with the switch (4) the
machine will function as a blower for dust, dry leaves and
other light debris.
Never blow incandescent, burning, flammable, toxic,
corrosive, or harmful materials.
Maintenance and service instructions
Cleaning
Before any work on the machine itself, pull the mains
plug.
Always keep the machine clean.
Use compressed air or a damp cloth to keep clean the
vacuum cleaner.
17