Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Assembly (continued)
15
Fastening middle crossbar
□
Ask for assistance to flip around the previous assembly at its front edges.
□
With the pilot holes as a guide, fasten the middle crossbar (Z) to the side panels (K and M) by attaching two metal
brackets (QQ) at the joints, using two short flat head screws (PP) per bracket.
M
16
Attaching back panels
□
Now, go back and securely tighten all the cam locks and screws. Make sure all the parts are tight and there are no
gaps between the parts. This will help keep the unit square.
□
Pick up the upper back panel (V) and align the pre-drilled holes against the upper long edge with the pilot holes on the
back of the top panel (O). Attach it in place using the provided washer head screws (GG).
□
Using the pilot holes as a guide, align and attach the side back panels (W) to the mantel with the provided washer head
screws (GG).
NOTE: We recommend attaching back panel with the screws at the corners first.
Z
Z
V
W
K
W
The ventilation holes are
located at the bottom.
PP
K/M
PP
QQ
Z
GG
Tabla de contenido
