Placement And Operation; First Use - L'OR SUPREME Manual De Instrucciones

3 . PL ACEM ENT AN D OPER ATION
THE APPLIANCE MUST BE FLUSHED WITH FRESH DRINKING WATER
BEFORE THE FIRST USE.

3.1 First use

Open the water tank cover, remove lid.
Take the water tank out of the machine.
Clean the tank for the first use with
a food grade cleaning agent, rinse well
after cleaning.
The power plug and accessories are included
in the waste bin. Remove the drip tray to
retrieve the parts.
EN
Switch on the machine.
| L'OR Suprême
6
Fill up with fresh drinking water. Ensure that
the water tank is correctly aligned. [Front]
towards you. Install the lid, and close the
cover.
1
Connect the milk pipe (1) at the machine side,
and guide into a milk pack (milk version).
The display shows the steps to guide
the user through the initial settings.
As an alternative to the use including the
water tank, the machine can be connected to
the water mains.
This may require a water filter or water
softener depending on your local water quality.
Please contact your service representative
for installation.
1
Connect the power cord (1) to the machine,
and plug into a power outlet.
The machine will heat-up until the
operational temperature has been reached,
and start a rinsing cycle.
Caution: very hot water is running
from the outlets.