Installation - auna Mary Ann Manual De Instrucciones

INSTALLATION

• Carefully remove the unit from its
packaging and all packaging materials
from the unit.
• Unwind the power cord and unplug it to its
full length.
• Unwind the FM cable antenna completely
and pull it out to the full length.
• Place the device on a flat and stable
surface close to a wall outlet and away
from strong magnetic fields.
• Plug the power plug into the wall outlet.
• Lift the turntable cover. The turntable has
been provided with a transport lock for
shipping. To remove the transport lock,
use a coin or screwdriver and unscrew the
transport lock clockwise. This may cause
the platter to rotate.
• Remove the white plastic guard from the
needle by sliding it down in the direction
of the arrow.
• Be careful not to damage the needle
during use, as this is not covered by the
warranty.
• Remove the tonearm fuse.
• Release the tonearm locking lever.
• Insert the plug of the power adapter into a
230 V ~ 50 Hz socket and the power cord
into the power connector at the back of
the device.
Transport screw
Tone arm
lock lever
Stylus cover
EN
29