Storing And Transport; Trouble Shooting; Corrective Action - WorkPro W125048A Instrucciones Originales

 Check the covers and protective devices for
damage and correct fit.Replace these if necessary.
 Replace a blunt or bent saw blade or one which has
been damaged in some other way.

9. STORING AND TRANSPORT

Storage
 Store the device in a dry and dustproof location and
out of reach of children.

10. TROUBLE SHOOTING

When something isn't working.
Malfunctions are often caused by minor faults. You can easily remedy most of these yourself. Please consult the
following table before contacting the vendor.
You will save yourself a lot of trouble and possibly money too.
Problem
Device does not start
Device works with
interruptions
Poor sawing performance
Saw blade quickly
becomes blunt
GB
Possible cause
Discharge the battery (9)
Battery (9) not inserted
Switch lock (7) has not been activated properly
On/off switch (8) is broken
Internal loose contact
On/off switch (8) is defective
Saw blade (1) blunt
Incorrect sawing speed
Low battery power
Saw blade (1) unsuitable for the
workpiece to be processed
Too much pressure applied
Sawing speed too high
12
 Remove the rechargeable battery from the device
before storing the device.
 The optimum storage temperature for the battery
and device is between 32°F/0℃ and 104°F/40°C.
Avoid extreme cold or heat during storage,so that
the battery does not lose performance.
Transport
 Secure the appliance against slipping.
 If shipping, use the original packaging wherever
possible.
Charge rechargeable battery
Charging the battery pack section.
Insert the battery
Switch it on (
Contact your online service
Contact your online service
Insert a new saw blade
Adjust sawing speed
Charge rechargeable battery
Charging the battery pack section
Insert a suitable saw blade
( ASSEMBLY section)
Reduce the pressure
Reduce the sawing speed

Corrective action

OPERATION section)