Bestop 77309 Instrucciones De Instalación página 20

Section 16 Install 29' Wire Harness
Route 29' Wire Harness
Route the 29' Wire Harness from the interior
side of the CHMSL, above the headliner, down
the rear driver side pillar, under the carpet,
through the cab vent, into the vehicle bed,
and along the top of the bed, underneath the
bed rail cap. See Detail B.
NOTE: Be sure the wire harness is secured
between the vehicle cab and bed. Cut three
2" pieces of the Foam Tape and use the tape
to fasten the wire to the back side of the
vehicle bed, and to the top of the bed as
shown in Detail A.
P20 - 77309 Rev. H 0922
Detail A
Tools
Utility Knife
Parts
29' Wire
Harness
Qty. 1
Foam Tape
Part #595.31
2" Pieces
Installation Instructions - Supertop for Trucks
Detail B
Harness comes
from the CHMSL,
Foam under headliner,
Tape behind trim
panel, under the
carpet, and out
through the vent
Page 20
WARNING
Wire Harness must
be routed clear of
all airbags.
© 2020 Bestop, Inc.