Bestop 77309 Instrucciones De Instalación página 19

Flip Rear Driver Side Seatbacks Forward; Remove CHMSL
Section 15
Use latch on rear
of seat to release
seatbacks
Use the latch on the rear of the driver side
rear seatback to release the driver side and
middle seatbacks, and flip both seatbacks
forward.
P19 - 77309 Rev. H 0922
Installation Instructions - Supertop for Trucks
T20 Torx Driver
Remove four (4) Torx Screws.
Use a T20 Torx Driver to remove the 4 screws
that attach the Center High-Mounted Stop
Light to the vehicle cab, and remove the
CHMSL.
The light housing will remain attached to the
wire harness - do not cut any wires at this
time.
Page 19
© 2020 Bestop, Inc.