Bosch PowerTube 500 Instrucciones De Servicio Originales página 15

Removing the PowerTube battery (pivot)
(see figure A)
A
1
(1)
(4)
❶ To remove the PowerTube battery (4), open the
lock (2) using the key (1). The battery will be un-
locked and fall into the safety restraint (8).
❷ Press on the safety restraint from above. The
battery will be unlocked completely and fall into
your hand. Pull the battery out of the frame.
Note: As a result of varying designs, the battery may
need to be inserted and removed using a different
method. Read the eBike manufacturer's operating in-
structions.
Bosch eBike Systems
(2)
2
(8)
Inserting the PowerTube battery (pivot)
(see figure B)
B
(1)
2
4
In order for the battery to be inserted, the key (1)
must be inserted into the lock (2) and the lock must
be open.
❶ To insert the PowerTube battery (4), place it so
that its contacts are in the lower holder of the
frame.
❷ Push the battery upwards until it is held by the
safety restraint (8).
❸ Hold the lock open with the key and press the
battery upwards until you hear it click into place.
Check that the battery is secure in all directions.
English – 13
(2)
1
(4)
(2)
3
(4)
0 275 U07 3PX | (08.06.2022)
(8)