Configuration Of The Drive Group (If Necessary) - ECOFOREST Kit Silo Guía De Instalación Y Mantenimiento

8.

CONFIGURATION OF THE DRIVE GROUP (IF NECESSARY).

The settings in the drive groups are configured at the factory as indicated in the diagram below, so their
manipulation is not necessary.
If for any characteristic of your installation you must adjust them, keep in mind that the mode in which it is
shipped is the one tested in the factory and for which the system is configured.
q
Unplug the valve or preferably the zone manager.
w
Open the valve head cover with the help of a Philips screwdriver.
e
Remove the knob and cover.
r
Make sure the switches are all in the position shown (all OFF).
t
lose the lid, tighten the screw and replace the knob.
y
Reconnect power to the zone manager.
u
Make sure the power head automatically adjusts the valve.
23