Specific Safety Rules - Temper KEH-470 Manual De Instrucciones

KEH470
Hydraulic Crimping Tool
2. Personal safety
c. Stay alert, watch what you are doing and use common sense when
operating the tool. Do not use the tool while you are tired or under
the influence of drugs, alcohol or medication.. A moment of
inattention while operating hydraulic tools may result in serious
personal injury.
d. Use safety equipment. Always wear eye protection. Safety
equipment such as dust mask, non-skid shoes, hard hat, or
hearing protection used for appropriate conditions will reduced
personal injuries.
e. Dress properly. Do not wear loose clothing or jewelry. Keep your
hair，clothing and gloves away from moving parts. Loose clothes
jewelry or long hair can be caught in moving parts.
f. Do not force the tool. Use the correct power tool for your
application .The correct power tool will do the job better and safer
at the rate for which it was designed.
g. Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the hydraulic crimping tool. This tool is
dangerous in the hands of untrained users.
h. Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
Hydraulic crimping tool operation. If damaged, have the Hydraulic
crimping tool repaired before use. Many accidents are caused by
poorly maintained power tools.
i. Use the Hydraulic Crimping Tool, accessories and tool bits etc., in
accordance with these instructions and in the manner intended for
the particular type of tool, taking into account the working
conditions and the work to be performed. Use of the Hydraulic
Crimping tool for operations different from those intended could
result in a hazardous situation.
3. Service
Have your Hydraulic Crimping Tool serviced by a qualified service
technician using only identical replacement parts. This will ensure that
the safety of the Hydraulic Crimping Tool Kit is maintained.

SPECIFIC SAFETY RULES

1. Maintain labels and nameplates on the tool which carry important safety
information. If unreadable or missing, contact the agent to replace.
2. This product is not a toy, keep it out of reach of children.
3. Do not slide your fingers in the dies profile.
4. Do not put your fingers in the head of the hydraulic crimping tool when
you slide the dies inside it. Your fingers could be pinched very severely.
5. Do not use the tool without die.
6. Do not crimp on live cables or conductors
7. Do only crimp cooper or Al conducting material
8. The warnings, precautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may
occur. It must be understood by the operator that common sense and
caution are factors which cannot be built into this product, but must be
supplied by the operator.
www.grupotemper.com