English; Technical Specifications - EGAmaster 51660 Manual De Instrucciones

ENGLISH

Capacity
Minimum Lifting Range
Maximum Lifting Range
Base L x W
WARNING!
1. Study, understand, and follow all instructions before operating this device.
2. Do not exceed rated capacity.
3. Use only on hard, level surfaces, with less than 3 degrees of slope.
4. Adequately support the vehicle before starting repairs.
5. Use of this product is limited to the removal, installation, and transportation in the lowered
position, of transmissions, transfer cases, and transaxles.
6. No alterations shall be made to this product.
7. Only attachments and/or adapters supplied by the manufacturer shall be used.
8. Do not get under or allow anyone under the vehicle until it has been supported by jack
stands.
9. Center load on saddle prior to lifting.
10. Never use on a lawn mower or lawn tractor.
11. Do not use this jack for any use other than the manufacturer specified usage.
12. Failure to heed these markings may result in personal injury and/or property damage.
- Inspect the jack carefully before each use. Ensure the jack is not damaged, excessively worn,
or missing parts.
- Do not use the jack unless it is properly lubricated.
- Using a jack that is not in good clean working condition or properly lubricated may cause
serious injury.
- Inspect the work area before each use. Make sure it is free and clear of any potential hazards.
DO NOT OPERATE OR REPAIR THIS EQUIPMENT WITHOUT READING THIS MANUAL.
To maintain the Transmission Jack and user safety, the owner is responsible for reading and
following these instructions.
- Inspect the service jack for proper operation and function.
- Keep instructions readily available for equipment operators. Make certain all equipment
operators are properly trained; understand how to safely and correctly operate the unit.
- Allow unit operation only with all parts in place and operating properly.
10

TECHNICAL SPECIFICATIONS

SAFETY MARKINGS
INSPECTION
51660: 0.3 Ton
51661: 0.5 Ton
1140 mm
1945 mm
580x580 mm