Bigben PARTY PARTYBTHPM Manual Del Usuario página 14

7. EQ button. Press briefly to add an equaliser. Press again to cancel.
• EQ 1: Normal
• EQ 2: POP
• EQ 3: Rock
• EQ 4: Outdoors
8. Microhphone input 6.35 mm
9. USB/SD card input
NB : Maximum supported capacity of 32 GB for playing via USB/SD card. MP3 music encoding
only.
10. Mains power supply 5V/1A
Charging
• Connect the USB cable to the charging port on top of the speaker. During charging, the
LED indicator turns red. The charging LED light switches off when charging is complete.
• Full charging can take up to 4 hours depending on the USB power source.
• A beep will be heard a few minutes before the battery is discharged. Remember to plug
in your speaker to charge it.
• Note: When charging your speaker you will NOT be able to use it. You need to wait to
charge it first or there will not be sufficient power.
Bluetooth connection
• When the speaker is turned on, it automatically switches to Bluetooth search mode.
• Search for "PARTYBTHPM" on your mobile device and select it. Once found, a beep will
sound to indicate that the speaker is connected to the device.
• During pairing, the LED indicator flashes. Once the speaker is paired, it turns solid blue.
• All connections are located at the rear. The playback mode will automatically default to
the connected device. Disconnect the USB-SD card or the auxiliary cable to return to the
Bluetooth connection.
Technical specifications
Output power
Loud-speaker
Battery
capacity
EIRP
Note: The maximum connection distance is approximately 10 metres. Place your Bluetooth
speaker as close as possible to the device to avoid the connection being disrupted.
In an environment with electrostatic discharge, the device may turn off. The user must
then recharge the battery and reset the device.
2 X 5 W RMS
2 x 4"
5 V, 2400 mAh
4.92 dBm
Wireless
transmission
distance
Product
dimensions
Bluetooth
pairing name
- EN 14 -
10 meters
180 x 170 x 370mm
PARTYBTHPM