Tabla de contenido
Idiomas disponibles
Idiomas disponibles
• Do not use damaged, deformed or vibra
Before use
• Always check that the supply voltage is the same as the voltage indicated on the nameplate of the tool
• Always mount auxiliary handle A or B; never use the tool without it
• Dust from material such as paint containing lead, some wood species, minerals and metal may be harmful
(contact with or inhala
of the dust may cause allergic rea
s and/or respiratory diseases to the
operator or bystanders); wear a dust mask and work with a dust extr
evice when connectable
• Certain kinds of dust are classified as carcinogenic (such as oak and beech dust) especially in c
with addi ves for wood condi
g; wear a dust mask and work with a dust extrac
device when
connectable
• Follow the dust-related na
requirements for the materials you want to work with
• Secure the workpiece (a workpiece clamped with clamping devices or in a vice is held more securely than
by hand)
• Do not clamp the tool in a vice
• Use completely unrolled and safe extension cords with a capacity of 16 Amps (U.K. 13 Amps)
During use
• When working, always hold the tool firmly with both hands and take a secure stance
• Always keep the cord away from moving parts of the tool; direct the cord to the rear, away from the tool
• If the cord is damaged or cut through while working, do not touch the cord, but immediately disconnect
the plug
• Never use the tool when cord is damaged; have it replaced by a qualified person
• In case of electrical or mechanic
ately switch off the tool and disconnect the plug
• In case of current interrup on or when the plug is accidentally pulled out, release switch in order to
prevent uncontrolled rest
A er use
• Before you put down the tool, switch off the motor and ensure that all moving parts have come to a
complete stands
• A er switching off the tool, never stop the rota
of the accessory by a lateral force applied against it
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
• Do not connect the blue (= neutral) or brown (= live) wire in the cord of this tool to the earth terminal of
the plug
• If for any reason the old plug is cut off the cord of this tool, it must be disposed of safely and not le
una ended
OPERATING INSTRUCTION
1. Moun
ry handles
disconnect the plug
Mount auxiliary handle A as illustrat
hten both screws supplied with hex key B.
2.Moun
disconnect the plug
- clean spindle D and all parts to be mounted - screw VELCRO backing pad E onto spindle D while pushing
spindle-lock bu on F ! push spindle-lock bu on F only when spindle D is at a stands
- simply press wool bonnet G(M/N) onto VELCRO backing pad E - for removing accessories handle vice-versa
3.Before using the tool
- ensure that accessory is correctly mounted and firmly
htened - check if
6
GB
Tabla de contenido
