Andis CNG-1 Manual De Instrucciones página 5

THIS APPLIANCE IS INTENDED FOR PROFESSIONAL AND
HOUSEHOLD USE
OPERATING INSTRUCTIONS
Nail grinder must be pre-charged fully before using it for the first time. To start nail
grinder, push the POWER button; to stop, push the POWER button again. To turn on
TURBO speed (7,400 RPM), double click the POWER button; to return to NORMAL
speed (6,500 RPM), double click the POWER button (Figure A).
POWER SUPPLY
This unit is equipped with a universal AC/DC power adapter/battery charger (Figure A).
CHARGING NAIL GRINDER
The battery charger is intended for use with Andis CNG-1 nail grinder. Remove the
nail grinder and charger from the carton. Plug the charger into a 120V AC outlet, or
according to your local power standards (Figure A). Confirm the voltage available
with each overseas location before using the appliance. For connection to a 240V
supply, use an attachment plug adapter of the proper configuration for the power
supply receptacle.
The nail grinder must be OFF before plugging the charger into the outlet. Plug the
adapter cord plug directly into the bottom of the nail grinder (Figure A). The nail
grinder has a lithium-ion battery that cannot be damaged by overcharging. We
recommend that the nail grinder be unplugged if not used for seven or more days.
NAIL GRINDER INDICATOR LIGHTS
See the chart on page 4 for charging status and corresponding indicator lights.
FAILURE TO CHARGE
1. Make sure voltage is present at the wall outlet (confirm with an appliance you
know is working).
2. Check to make sure adapter cord plug is plugged firmly into bottom of nail
grinder. If failure to charge still exists, return nail grinder to Andis or an Andis
authorized service station for examination and repair or replacement.
5