Lancia Ypsilon Brio - LANCIA Ypsilon Serie Manual Del Usuario

CAUTION
Battery key set
The electrically power assisted cycle is exclusively equipped with 2 keys uniquely associated with the key lock located on the
battery installed on the product to allow locking and/or unlocking by extraction.
Identify the keys on the bike, located near the handlebar or attached to another component of the electrically power assisted
cycle (frame or battery), taking care that they do not get mislaid.
CAUTION
Check with negative outcome
In the event that, during assembly, factory defects, unclear passages or difficulties in assembly are found, do not ride the ped-
al-assisted bicycle and contact the support service of your authorized dealer or visit the website www.urbanchicemobility.it
CAUTION
In the interest of technological development, the manufacturer reserves the right to modify the item with no prior notice and
this manual will not be automatically updated.
For information and to consult the revisions of this manual visit the website www.urbanchicemobility.it

Lancia Ypsilon Brio

After aligning the front of the frame with the rear part by rotating them around the coupling hinge pin, tighten the lever on the
frame opening/closing mechanism as follows:
Grasp the locking device (A) of the lever of the opening/closing mechanism and push it upwards until it allows the correct
insertion in its seat (B) present in the front of the frame and then turning it to the right until it engages in its safety seat.
Rotate the lever towards the rear of the frame until tightened.
Positioning the handlebar stem
Raise the handlebar stem until it is vertical; tighten the handlebar stem using the locking device indicated by the letter A.
18