Idiomas disponibles
Idiomas disponibles
CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must
be returned, it is important that the product is returned in the original factory box and packaging.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately.
The arising condensation water might damage your device. Leave the device switched off until it has reached room
temperature.
Please ensure the following is ready:
You have a broadband internet connection. A wireless broadband router is connected to the internet successfully. The radio
supports Wireless B, G and N connection (Wireless N router can also be used with the setting on B or G). You know the Wired
Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA) data encryption code/password. You need to key in the correct
code when the radio is connected to the wireless router for network connection. If you do not know the code/password,
please contact the person/technician who set up the router/network for you. The radio can work via Wireless network
connection (Wi-Fi connection).
The radio is powered by the mains adapter. A 12V 2A external power adapter is included. Connect the power adapter to the
radio and the mains socket. Make sure to set the power switch to ON (I; backside of device) to power the device. The display
will illuminate. The
button on the front of the device is designated to function as standby switch only.
Internet connection can be setup via Wireless network (WiFi). Your radio requires a broadband Internet connection.
•
If this is first time use, the Configure Network wizard will be displayed. Choose Yes to start configuring network.
Press the [◄] button to highlight Yes and press [Tune/OK] to confirm.
Select Add/Remove AP from the list, use the [Tune/OK] knob to scroll and press it to confirm, then choose Add AP (Scan):
•
It will start scanning the available Wi-Fi networks. Scroll to your network and press [Tune/OK] to confirm. If your Wi-
Fi network is password protected, it will ask you to enter the password.
Note: The password is case sensitive. Please consult with the one who setup your network if you don't know the password.
When the Wi-Fi connection is successful, "Association Complete" will be shown briefly. The Wi-Fi signal bar will appear on
the top left corner of the display.
Press [
/EQ] to enter the home screen. Scroll by rotating the [Tune/OK] knob or the [◄/►] button on remote:
My Favorite - To show the list of favorite stations which have been assigned to the presets. There are up to 150 presets
available.
Internet Radio - Start exploring worldwide radio stations here.
Media Centre - You can browse and stream music from your network via UPnP or DLNA compatible devices.
DAB+/DAB Radio - Pick up DAB+ and DAB radio signal if available in your local area (no internet connection required).
FM Radio - Receive FM radio stations in your local area (no internet connection required).
BT - BT playback, to play audio streamed (receive) from another BT enabled device after pairing.
AUX In - Play music from external media devices by connecting the Aux-in jack.
CD Player - Play CD MP3.
USB - Play music from a USB drive.
Micro SD - Play music from a Micro SD card.
Alarm - Alarm clock. Two alarm settings available.
Sleep Timer - Enable the timer to turn the radio in standby mode after the selected time has elapsed.
Configuration - Options/settings available to personalize.
On the main menu, choose Internet Radio and you will find the options below:
Skytune
Select Skytune to start enjoying thousands of radio stations over the world. You can filter your search by Region, Music genre
and talks. The Local Radio lets you access the stations available in your local area quickly.
Note: You can change the Local Radio area under Configuration> Local radio setup.
When you scroll along the list of Globe All and want to quickly reach to a certain point of the long list, input the index number
on the remote control to quickly jump to that point. For example, on the remote control, input 28 and press OK, it will
highlight the station no. 28.
Search
Instead of browsing the radio station list, you can input a few characters of the desired station to filter out / short list the
stations.
My Favorite
This is to show the list of your Favorite stations which have been assigned to the presets.
4
