Lithium Battery Safety - Hach Clean & CAL pH Mount Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 45
5.2.2 Connect the LED to battery power
Electrical shock hazard. Externally connected equipment must have an applicable country safety
standard assessment.
The LED can connect to battery power. Only use the manufacturer-supplied rechargeable lithium-ion
battery pack. Make sure to charge the battery pack before use. Connect the battery pack to a mobile
phone charger or a laptop (not supplied) to charge the battery pack.

5.2.2.1 Lithium battery safety

Fire and explosion hazard. Lithium batteries may get hot, explode or ignite and cause serious injury if
exposed to abuse conditions.
• Do not use the battery if there is visible damage.
• Do not use the battery after strong shock or vibration occurs.
• Do not expose the battery to fire or ignition.
• Keep the battery at temperatures less than 60 °C (140 °F).
• Keep the battery dry and away from water and liquids.
• Do not crush, puncture or incinerate the battery.
• Discard the battery in accordance with local, regional and national regulations.
• Do not use or store the instrument in direct sunlight, near a heat source or in high temperature
environments such as a closed vehicle in direct sunlight.
16 English
W A R N I N G
W A R N I N G
Tabla de contenido
loading

Este manual también es adecuado para:

100747100748100745

Tabla de contenido