Remove Contents From Carton; Add Engine Oil - Powermate PM2000 Manual Del Usuario

Remove Contents from Carton

1. Open carton completely by cutting each
corner from top to bottom.
2. Remove and verify carton contents prior to
assembly. Carton contents should contain
the following:
Accessories
Item
Main Unit
Owner's Manual
0.4 Liter Oil SAE 10W-30
Service Warranty
Emissions Warranty
3. Record model, serial number, and date of
purchase on front cover of this manual.
NOTE:

Add Engine Oil

Engine damage. Verify proper type and quantity of
engine oil prior to starting engine. Failure to do so
could result in engine damage.
1. Place generator on a level surface.
2. Verify oil fill area is clean.
3. See Figure 2-7. Remove oil fill cap and
wipe dipstick clean.
8
Figure 2-6. Instruction Decal (if equipped)
CAUTION
(000135)
Qty.
1
1
1
4. Add recommended engine oil as shown in
1
the following chart.
NOTE: Use petroleum based oil (supplied) for
1
engine break-in before using synthetic oil.
.
NOTE: Some units have more than one oil fill
location. It is only necessary to use one oil fill
point.
5. See
neck. Remove dipstick and verify oil level
is within safe operating range.
Figure 2-7. Remove Dipstick
10W-30
Synthetic 5W-30
Figure 2-8. Screw dipstick into filler
Owner's Manual for Portable Generator
009414
000115
SAE 30
000399