How To Use; Switching Mode; Factory Reset - smartmi E1 Manual Del Usuario

How to Use

On/Standby
Press on/standby button to turn on the
purifier. When the purifier is on, press the
on/standby button to enter standby mode.
Resetting Wi-Fi
While the purifier is on, press and hold
the mode button for 5 seconds, Wi-Fi
indicator blinking, Wi-Fi is successfully reset
and purifier enters the state of waiting for
connection.

Switching mode

While the purifier is on, press the mode
switch button to cycle through modes.
Level 2
Level 1 Level 3
Enabling/Disabling Wi-Fi
While the purifier is on, press and hold
the mode button and on/standby button
simutaniously for 5 seconds, the Wi-Fi will be
disabled. While Wi-Fi is off, same operation
can enable the Wi-Fi.
09

Factory Reset

While the purifier is on, press and hold Mode
button for 10 seconds, the mode indicator
and Wi-Fi indicator flash three times from
left to right in sequence, factory reset
completed.
Note: After factory reset performed, the filter life
span will be recalculated.