PROZIS Pix-E Avant Manual Del Usuario página 7

6. DC Input
This port is used to connect the power adapter. It is used both to provide direct power to the
projector and to charge the internal battery.
NOTE: The power adapter may become warm or hot while in use. Never cover or attempt to
touch the adapter while it is connected to a power source.
7. Audio Output
This port allows you to connect an external speaker or headphones to the projector.
8. HDMI Input
This port is used to connect the HDMI® (High-Definition Multimedia Interface) connector. It is
compatible with TV, HD DVD, Blu-Ray, and other protected content playback formats.
9. Air Outlet Vent
When the projector is in use, warm air will exit from this vent.
NOTE: Always make sure the air vents are never obstructed by paper, clothing, or any other
objects. Blocking the vents may result in overheating.
Bottom projector view: see page 2, figure 2
1. Air Inlet Vent
When the projector is in use, cool air will enter this vent.
2. Tripod Dock
This dock allows the projector to be mounted onto the included tripod.
3. Non-Slip Feet
These rubber feet give the projector additional traction, providing more stability when placed
on a surface.
CHARGING THE PROJECTOR
1. Insert one end of the supplied power cable in the DC input.
2. Insert the plug of the power cable into a power outlet.
ATTENTION! Please use the supplied AC/DC adapter to avoid possible dangers
such as electric shock and fire.
EN
7