Operating Instructions; Important - Bella Professional 90018 Manual De Instrucciones

SO-304058_90018_IM r3:Layout 1

OPERATING INSTRUCTIONS

HIGH/MED/LOW SPEEDS
CAUTION: Keep hands and utensils out of the blending jar while blending to prevent
the possibility of severe injury to persons or damage to the unit. A scraper may be used
but must only be used when the unit is not running.
CAUTION: Use extreme care when handling the blade assembly.
Do not touch blades with your fingers. The blades are very sharp and can cause injury if touched.
IMPORTANT: Your blending jar and blades are subject to wear during normal use.
Always inspect for broken, cracked or loose blades. If blades are damaged, do not use.
Before starting, make sure power cord is unplugged and all control panel indicator lights are off.
See HINTS FOR BEST RESULTS and DO NOT! sections of this owner's manual before using this Blender.
1. Make sure that the cutting blade or rubber seal ring, and collar are properly assembled
and securely fastened to the blending jar. See BLENDER ASSEMBLY INSTRUCTIONS for details.
2. Place the assembled blending jar on top of the motor housing.
CAUTION: Never place the blade assembly on the motor housing without the blending jar
and collar being completely assembled and securely tightened.
3. Add ingredients to the glass blending jar.
4. NOTE: When blending, foods or liquids tend to expand as they rise up the sides
of the blending jar. Do not fill the glass blending jar more than 3/4 full, 4-1/2 cups (36-oz.)
and pay close attention while processing.
WARNING: Never operate when the blending jar is empty.
5. Make sure the measuring cap is in position in the lid.
Place blending jar lid with measuring cap onto the glass blending jar.
Press the blending jar lid firmly into the glass jar so that the lid is tightly sealed.
IMPORTANT: Always hold the lid in place during processing.
All manuals and user guides at all-guides.com
9/4/08 4:57 PM
7
Page 7
Blender