Genius SW-2.1 300 Guía Rápida página 4

Connecting the SW-2.1 300 Speakers
1. Place the speakers next to the monitor, one on either side.
2. Connect the AC power cord (A) to a suitable AC outlet.
3. Plug the satellite speaker cables (B) into the host speaker
"OUTPUT" RCA jacks.
4. Insert the 3.5mm plug (green) of the audio cable (C) into the sound
card or other audio source.
Control Function
1. Power/Volume:Turn the Volume button to turn on/off the system
power and to control the volume level.
2. BASS:Controls speaker's bass level.
Warning
1. Do not connect the power plug into an AC outlet until all
connections are made.
2. Remove AC power cord if you do not use this device for a
long time.
3. Do not expose the speakers to any dripping or splashing and
make sure no object filled with liquids, such as vases, etc., are
placed on them.
ENGLISH